name :
AN61G
title :
PowerHA SystemMirror 7 Planning, Implementation, Customization and Basic Administration
category :
Systems
vendor :
IBM
classroomDeliveryMethod :
Classroom IBM
descriptions :
description :
OverviewThis course is designed to prepare students to install and configure a highly available cluster using PowerHA SystemMirror.AudienceThe audience for this advanced course is students who are experienced AIX system administrators with TCP/IP networking and AIX Logical Volume Manager (LVM) experience who are responsible for the planning and installation of a PowerHA SystemMirror 7.1 and later cluster on an IBM Power Systems server running AIX V6.1 or later. The lab exercises are conducted on an AIX 7.1 TL2 level system.PrerequisitesYou should be AIX system administrator and have TCP/IP, LVM storage, and disk hardware implementation skills. These skills are addressed in the following courses or can be obtained through equivalent education and experience:
  • Power Systems for AIX II:  AIX Implementation and Administration (AN12G)
Objective
  • Explain what high availability is
  • Outline the capabilities of PowerHA SystemMirror
  • Design and plan a highly available PowerHA cluster
  • Install and configure PowerHA SystemMirror in the following modes of operation:
  • Single resource group on a primary node with standby node (active/passive)
  • Two resource groups in a mutual takeover configuration (active/active)
  • Configure resource group startup, fallover, and fallback policies
  • Perform basic system administration tasks for PowerHA
  • Perform basic customization for PowerHA
  • Perform basic problem determination and recovery
This course is the first in the PowerHA 7 curriculum. The following courses can be taken after this course is completed:
  • PowerHA 7 Advanced Configurations (AN62G) 
Course OutlineDay 1
  • Welcome and course introduction
  • Unit 1: Introduction to PowerHA SystemMirror
  • Unit 2: Planning and configuring network and storage for PowerHA SystemMirror
  • Exercise 1: Lab setup, cluster planning, and exploring fallover
  • Exercise 2: Preparing the AIX environment for PowerHA SystemMirror
Day 2
  • Unit 3: Configuring applications for PowerHA SystemMirror
  • Unit 4: Configuring a PowerHA SystemMirror cluster
  • Exercise 3: Preparing an application for integration with SystemMirror
  • Exercise 4: Initial cluster configuration
Day 3
  • Unit 5: Cluster validation and testing
  • Unit 6: Basic PowerHA SystemMirror administration
  • Exercise 5: Cluster validation and testing
  • Exercise 6: Extending the configuration
Day 4
  • Unit 7: Events
  • Unit 8: Basic troubleshooting
  • Exercise 7: Events
  • Exercise 8: PowerHA SystemMirror problem determination
Day 5
  • Unit 9: PowerHA SystemMirror installation
  • Exercise 9: Install and maintain PowerHA SystemMirror
  • Open lab
overview :
[This course is designed to prepare students to install and configure a highly available cluster using PowerHA SystemMirror.]
abstract :
This course is designed to prepare students to install and configure a highly available cluster using PowerHA SystemMirror.
prerequisits :
objective :
Overview This course is designed to prepare students to install and configure a highly available cluster using PowerHA SystemMirror. Audience The audience for this advanced course is students who are experienced AIX system administrators with TCP/IP networking and AIX Logical Volume Manager (LVM) experience who are responsible for the planning and installation of a PowerHA SystemMirror 7.1 and later cluster on an IBM Power Systems server running AIX V6.1 or later. The lab exercises are conducted on an AIX 7.1 TL2 level system. Prerequisites You should be AIX system administrator and have TCP/IP, LVM storage, and disk hardware implementation skills. These skills are addressed in the following courses or can be obtained through equivalent education and experience:
  • Power Systems for AIX II:  AIX Implementation and Administration (AN12G)
Objective
  • Explain what high availability is
  • Outline the capabilities of PowerHA SystemMirror
  • Design and plan a highly available PowerHA cluster
  • Install and configure PowerHA SystemMirror in the following modes of operation:
  • Single resource group on a primary node with standby node (active/passive)
  • Two resource groups in a mutual takeover configuration (active/active)
  • Configure resource group startup, fallover, and fallback policies
  • Perform basic system administration tasks for PowerHA
  • Perform basic customization for PowerHA
  • Perform basic problem determination and recovery
This course is the first in the PowerHA 7 curriculum. The following courses can be taken after this course is completed:
  • PowerHA 7 Advanced Configurations (AN62G) 
topic :
Course OutlineDay 1
  • Welcome and course introduction
  • Unit 1: Introduction to PowerHA SystemMirror
  • Unit 2: Planning and configuring network and storage for PowerHA SystemMirror
  • Exercise 1: Lab setup, cluster planning, and exploring fallover
  • Exercise 2: Preparing the AIX environment for PowerHA SystemMirror
Day 2
  • Unit 3: Configuring applications for PowerHA SystemMirror
  • Unit 4: Configuring a PowerHA SystemMirror cluster
  • Exercise 3: Preparing an application for integration with SystemMirror
  • Exercise 4: Initial cluster configuration
Day 3
  • Unit 5: Cluster validation and testing
  • Unit 6: Basic PowerHA SystemMirror administration
  • Exercise 5: Cluster validation and testing
  • Exercise 6: Extending the configuration
Day 4
  • Unit 7: Events
  • Unit 8: Basic troubleshooting
  • Exercise 7: Events
  • Exercise 8: PowerHA SystemMirror problem determination
Day 5
  • Unit 9: PowerHA SystemMirror installation
  • Exercise 9: Install and maintain PowerHA SystemMirror
  • Open lab
startDate :
2020-10-30T15:59:37Z
endDate :
2021-12-30T00:00:00Z
lastModified :
2020-10-30T08:00:40Z
created :
2014-05-03T19:09:57Z
duration :
40
durationUnit :
HOURS
ibmIPType :
listPrice :
2975
currency :
GBP
badge_Template_ID :
badge_Title :
badge_Url :

Enquire about this course: